• 1" diameter (will accept stock or aftermarket controls)
• 8H, 27 1/4 W, 4 1/2 Pullback
• 12H, 29 1/2 W, 5 1/2 Pullback
• 17H, 33 1/4 W, 5 1/2 Pullback
• With or without dimples

$249.95 - chrome, black, flat black

$219.95 - raw

$295.95 - chrome, black, flat black

$265.95 - raw

• 1.25" diameter (will accept stock or aftermarket controls)
• 8H, 0W, 0 Pullback
• 10H, 37W, 5.5 Pullback
• fly by wire, drilled for internal wiring, with or without gussets
  (*cost increase)

$295.95 - chrome, black, flat black

$265.95 - raw

• 1.25" diameter (will accept stock or aftermarket controls)
• 8H, 0W, 0 Pullback
• 13H, 37W, 5.5 Pullback
• fly by wire, drilled for internal wiring, with or without gussets
  (*cost increase)

$295.95 - chrome, black, flat black

$265.95 - raw

• 1" diameter (will accept stock or aftermarket controls)
• 8H, 27 1/4 W, 4 1/2 Pullback
• 12H, 29 1/2 W, 5 1/2 Pullback
• 17H, 33 1/4 W, 5 1/2 Pullback
• With or without dimples

$349.95 - chrome, black, flat black

$319.95 - raw

• 1" diameter (will accept stock or aftermarket controls)
• 8H, 27 1/4 W, 4 1/2 Pullback
• 12H, 29 1/2 W, 5 1/2 Pullback
• 17H, 33 1/4 W, 5 1/2 Pullback
• With or without dimples

$349.95 - chrome, black, flat black

$319.95 - raw

$249.95 - chrome or black, flat black, gray)

$219.95 - raw

$249.95 - chrome, black, flat black

$219.95 - raw

• Available in polished, black anodized, chrome and brass finishes.
  Sold in pairs.

• Available in polished, black anodized, chrome and brass finishes.
  Sold in pairs

• Wrapped in custom formed rubber and available in polished, black anodized and chrome finishes.
  Sold in pairs

• Our version of the BMX hand grip with a twist. Wrapped in custom formed rubber or knurled.
  Sold in pairs

• These little buddies are available in polished, chrome, black anodized and machine finishes. Sold in pairs.

• The Bone riser is our newest design and works with both 1" and 1 1/8" (Pro Taper) and goes with our new Moto Bar nicely!
  

$149.95 - raw
$154.95 - polished
$169.95 - chrome or black

• The 2 peice Bone riser is our newest design and works with both 1" and 1 1/8" (Pro Taper). The 2 peice design allows fitment for non standard center spacing.
  (sold in pairs)
  

• The 8 inch tall one piece Bone riser is our newest design and works with both 1" and 1 1/8" (Pro Taper) and goes with our new Moto Bar nicely!
  

$155.95 - raw
$159.95 - polished
$179.95 - chrome or black

• The 8 inch tall two peice Bone riser is our newest design and works with both 1" and 1 1/8" (Pro Taper). The 2 peice design allows fitment for non standard center spacing.
  (sold in pairs)
  

• 2” Solid Brass Dog Bone Risers
• Fits most standard trees
• Imported from Misumi Engineering in Japan

• Left or right, black, polished and chrome
  (sold individually)
  

• Left or right, black, polished and chrome. Works with our open ended grips and can be used on any 1" handlebar as long as a open ended grip is used. (sold individually)
  

• Our Vice Foot Pegs match the Vice Grips and are available in polished, black anodized, chrome and brass.
  Sold in pairs
  

• Our Vice Toes Pegs match the Vice Grips and Vice Grip Foot Pegs. Vice Toe Pegs and available in polished, black anodized, chrome and brass.
• Toe Pegs are sold individually
  

• Our clevis mount allows your foot peg to fold up and out of the way. Made from stainless steel.
• Sold in pairs
  

• Our seat pans and made from heavy guage steel, raw finish and available wit or without bungs.
  Contact us if interested in custom leather work (additional cost)
  

• Heavy duty "Valve Spring" seat springs allow the seat pan to sit lower lower on the frame and still have a comfortable ride. Available in ceramic coated black or silver as well as raw finish.
  

• Traditional coil seat springs allow the the seat pan to move and allow for a more comfortable ride. Available in black, chrome and raw.
  

• Todd's Cycle cusstom pivot is available in raw finish only and features brass bushings.
  

• Post style spring mount perch features a c-clip to retain the spring and causing the seat to bounce off the mount. Raw finish only and sold in pairs.
  

• The Martini light is an all new approach to lighting; small, compact, bright high quality lighting. CNC Aluminum, Martini lights are available in chrome, black and and raw finishes and come in two diameters; 4.5" and 5.75".

4.5” Diameter
$379.95 - Chrome/Black
$369.95 - Polished
$355.95 - Raw

5.75" Diameter
$389.95 - Chrome/Black
$379.95 - Polished
$365.95 - Raw

• Our Martini mount places the headlight as far back as possible, tucking the headlight in closer to the forks for a much cleaner look. Available soon, contact us for details and pricing

Contact us for details and pricing

• The Martini taillight matches our headlight. Made from CNC Aluminum with ultra bright high qualitiy LEDs and are some of the brightest on the market today. Martini taillights are available in chrome, black and and raw finishes.

$105.95 - Raw
$112.95 - Polished
$122.95 - Chrome / Black

• CNC Machioned, ultra bright LEDs (some of the brightest in the industry) and availabe in chrome, black ano and raw machined finishes.
  For touring bags or custom applications, installation is super easy stock plugs. A standard 2" hole saw is the only tool needed.
  

• Featuring a built in starter relay and 30 amp breaker. Mount anywhere. Available in polished, black and chrome.

• Improves Handling by triangulating Motor & Trans in the chassis Easy bolt up installation, Eliminates frame wobble at high speeds, or while cornering. Open trans plate design with ventilating air scoops to assist in trans cooling.

• The Todd's Cycle custom battery box includes top and bottom pieces and hardware. Made from billet aluminum. Battery not inlcuded
  Dimensions: Width - 5 7/8" Depth - 3 3/8" Height - 5 3/4
  Recommended batteries:
  Harley Part #: YTX-14LBS (Sportster)
  Harley Part #: YTX-14BS (V-Rod)

• Set up for Dyna (single disk) or V-Rod (dual disk) wheel
• Must use radial mount brakes
• 25mm Bearings

• Firestone Airide springs, Bilstein Gas Shocks, Automatic Load leveling system with on board, ECU sensor. On board air compressor, CNC machined aluminum shock mount and bag mount. Spherical bearings in top shock mounts. All necessary hardware, air lines, and mounting brackets. Available in two shock lengths, 12.25”, and 14”

• All Todd's Cycle tanks and fenders are hand made, in-house. To see some of our work, click the image to the left.
  

• Several cover styles to choose from
• Tall and Short Filters
• Mikuni, Keihin, Fuel Injected (S&S available soon)
• Fits Big Twin and Sportster

$371.95
Chrome or Black

• American made using Aerospace technology and Certified 6061 T6 Forged Billet Aluminum CNC Machined Housing; 100% Full Flow THROUGH duplex woven, T304 Stainless Steel Filter Media, Viton O-rings and two rare earth magnets. The ByPass (Pressure Relieve Valve) is also made of 6061 T6. Dyno tests show an increase of 5 or more horsepower.
  

$250.00
Machine Finish

$265.00
Polished Finish

$295.00
Chrome and
Anodized Finishes

• CNC Machined from solid aluminum, available knurled or with rubber insert. Fitment for most Yamaha, Suzuki, Honda, Kawasaki. bar end mirror setup also available. Contact us for complete details and availability.
  

• Call for current styles and availability